LSI Web BIOS configure RAID 1+0 10
1. Reboot System and Press Ctrl+H to go into LSI Web BIOS Configuration
2. Show all hardware disks in Physical View WIndows
3. Go into Configuration Wizard
4. Choose Manual Configuration
5. Setup Drive Group (DG Array) for Raid-1 of DG0
6. Setup Drive Group (DG Array) for Raid-1 of DG1
7. Add DG0 and DG1 to Span Virtual Disk, then click Next
8.Click Update Size for Virtual Disk and Choose RAID 10 at left column, other settings are in default. After tune all parameter of virtual disk, please select Accept
9. Write Through mode alert, please select Yes
10.Construct New Vritual Drive and Initialization alert, please select Yes
11. Build up a Virtual Drive of 7.275TB and status is optimal
12. Assign Virtual Drive is a Bootable Drive
13. Check Disks Consistency
14. Go to Homepage and Click Exit to reboot
2. Show all hardware disks in Physical View WIndows
3. Go into Configuration Wizard
4. Choose Manual Configuration
5. Setup Drive Group (DG Array) for Raid-1 of DG0
6. Setup Drive Group (DG Array) for Raid-1 of DG1
7. Add DG0 and DG1 to Span Virtual Disk, then click Next
8.Click Update Size for Virtual Disk and Choose RAID 10 at left column, other settings are in default. After tune all parameter of virtual disk, please select Accept
9. Write Through mode alert, please select Yes
10.Construct New Vritual Drive and Initialization alert, please select Yes
11. Build up a Virtual Drive of 7.275TB and status is optimal
12. Assign Virtual Drive is a Bootable Drive
13. Check Disks Consistency
14. Go to Homepage and Click Exit to reboot
